Back Maintenance HVAC, Plumbing Schematics Reduce Emergencies

Your water heater is one of the most used and more appliances in your home, and consumes a large regarding your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving on your home heating and energy costs.

Regular flushing of your water heater is considered the single most important step you consider to prolong its service life and to save energy. Over a period of time, sediments mount up in the bottom of your water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not merely destructive to the tank, but highly inefficient and will significantly raise your heating costs.

In most associated with the country, the average water heater lasts 3-5 years. Regularly flushing your hot water heater can double lifestyle of your water heater from 3-5 to 7-10 years. And with the costs of replacement running from $700 to over $1200 in some cases, getting the most from your heater ‘s very important in today’s affordable. In addition, regular flushing makes your hot water heater run more efficiently and can cut heating costs fifty percent. Depending on the volume of drinking water your home uses, that can mean a savings of $20 to over $50 a month or so.

To drain your water heater, initially you should set the thermostat to pilot (if it is really a gas water heater) or turn the circuit breaker off (if it is an electric heater). Failure to do so could result in overheating and severe damage to water heater. Next, close the water supply valve located on a water inlet line going into your water heater. Equipped to connect a hose to the drain valve located in the bottoom of the heater tank. Open the drain and allow it to run until all of your water has emptied from the heating unit. Then close the drain. Open the water supply valve and refill the central heater. You should also open a hot water faucet somewhere inside and stand there and watch it run for several minutes until the actual flows out smoothly. This will allow air to vent inside heater and the water lines. Finally, you can turn the thermostat in order to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).

Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your home to filter or condition the water so may less corrosive to your plumbing system, particularly in areas possess hard hot water. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in region to discuss options and merchandise to be fitting.

Abacus Plumbing, Air Conditioning & Electrical

The Woodlands, TX

(281) 528-1610

https://goo.gl/maps/Fccz1JjKrjN2