Your water heater is one pretty used and much more costly appliances in your home, and consumes a large associated with your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving with regards to your home heating and energy costs.
Regular flushing of the water heater is considered the single most important step you can take to prolong its service life and to save energy. In a period of time, sediments amass in the bottom of your hot water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not merely destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most involving the country, the standard water heater lasts 3-5 years. Regularly flushing your hot water heater can double the life of your water heater from 3-5 to 7-10 years. To provide a source costs of replacement running from $700 to over $1200 in some cases, getting the most from your heater is in today’s economy. In addition, regular flushing makes your water heater run more efficiently and can cut heating costs in half. Depending on the volume of drinking water your home uses, that can mean a savings of $20 to over $50 a fair amount of time.
To drain your water heater, you can find should set the thermostat to pilot (if it is really a gas water heater) or turn the circuit breaker off (if it is an electric heater). Failure to do so could result in overheating and severe damage to drinking water heater. Next, close the water supply valve located in the water inlet line going into your water heater. You may then connect a hose to the drain valve located towards the end of the central heater. Open the drain and allow it working out until all from the water has emptied from the heating unit. Then close the drain. Open the water supply valve and refill the hot water heater. You should also open a hot water faucet somewhere at home and stand there and watch it run for several minutes until the water flows out smoothly. This will allow air to vent via the heater and the water lines. Finally, you can turn the thermostat for you to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your residence to filter or condition the water so is certainly less corrosive to your plumbing system, particularly in areas which have hard water. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in location to discuss options and products to work for you.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX
(281) 528-1610